Inspire Woodcraft
Gen 2 Ultimate Dust Collection Kit DeWALT DW716 & DWS716
Gen 2 Ultimate Dust Collection Kit DeWALT DW716 & DWS716
Couldn't load pickup availability
With a Gen 2 Ultimate Dust Collection Kit installed, the DeWALT DW716 and DWS716 miter saws become the cleanest, most compact saws we've come across yet. And the new Gen 2 updated design makes them more efficient and easier to install, with a sleek factory look, at a significant cost reduction compared to our first-generation kits.
Everything you need for superior dust collection is in this kit, including:
- Upgraded Dust Collection Boot - Made from 2mm thick silicone for the perfect balance between weight, rigidity, and durability, this silicone dust boot installs behind the blade, into the factory dust port, to collect the majority of the unbearable amount of debris that comes off the back of the blade. Starts collecting dust on contact with material as little as 1/2" thick, won't get in the way of stock, and works at all miter angles.
- Replacement Bracket - This replaces the factory bracket (rear guard) behind the blade to provide a secure attachment point for the Upgraded Dust Collection Boot (using preinstalled T-10 screws).
-
Gen 2 Zero Clearance Dust Collection Throat Plate - This is what sets our dust collection apart from the rest! The Gen 2 Zero Clearance Dust Collection Throat Plate replaces your factory throat plate and utilizes a shroud that encases the blade, preventing ANY debris from escaping under the saw. The force of air generated by the spinning blade inside the shroud, coupled with the zero-clearance blade opening, forces all the debris out the rear of the throat plate and directly into the Upgraded Dust Collection Boot to be hauled away by your vacuum. Dust Collection Throat Plates are not intended to be used while making bevel cuts!
- Compact 90-Degree Elbow - Reclaim up to roughly FOUR INCHES of shop space with this compact 90-degree elbow specifically designed to fit DeWALT miter saws with dust ports that measure 1-5/8" outside diameter, like the DWS716 and late-model DW716. (As a convenience, an adapter is included in the DW716 kits for those that may have the early-model 1-1/2" dust ports.) And you don't have to wonder if your vacuum hose will work with this fitting. It will work with 2-1/2" dust collection hose, 2-1/2" shop vacuum style hose (standard-issue hoses that measure roughly 2-1/4" outside diameter), 1-7/8" shop vacuum style hose and Festool 36mm antistatic hose.
This video explains what all the parts are, what they do and how to install them (Using Gen 1 Throat Plate)!
All parts and pieces can be purchased separately should you need. The items in this kit purchased individually would add up to $95.25. That's over a 26% discount! AND we provide FREE SHIPPING for all US orders!
Only intended to be used on the DeWALT DW716 and DWS716 miter saw (including XPS models). Not tested or guaranteed to fit any other make/model. Parts and accessories for other makes/models can be found on our website. PLEASE DOUBLE CHECK THE MODEL NUMBER OF YOUR SAW BEFORE PLACING AN ORDER. Model numbers can be found on the top side of the motor housing.
Share
in a very small shop with shop vac dust control, my chop saw was the worst dust producer of any tool i owned. the full kit for a DeWalt saw was easy to install, and more effective than i could have imagined. I'm extremely impressed with the design and execution of the provided parts, and feel the cost is very reasonable for the final result. very well done!
The miter saw dust collector is magic in making sawdust disappear. The kit efficiently routes dust into the vacuum. Makes woodworking so much more enjoyable eliminating constant clean-up. Easy install, nice quality, great support.
Purchased kit, which included elbow duct, boot, and new boot. All fit well, with good instructions. So far, dust collection with my Dewalt miter is significantly improved.
After years of wading through ankle-deep piles of sawdust behind my chop saw, I was intrigued by this design for dust collection. Since my saw lives on a portable stand, I couldn't easily build an elaborate shroud for dedicated dust collection. After installing this system, I was absolutely amazed by its effectiveness! I would guess that this setup, attached to my shop vacuum, probably catches 97% of the sawdust from my chop saw. Truly amazing performance from such a simple design! The term "game changer" is so overused these days, but in this case, it truly applies. This is, without a doubt, one of the best investments I've made in my shop since the track saw. Thank you for such an innovative and effective design! Keep up the good work
I haven't had a chance to really give it a work out, but I made a few test cuts after the install. I was quite impressed and I'm only using a dedicated small Stanley vac that I have on the shelf underneath the saw. Looking forward to giving it a good workout. Only real issue I discovered was with the throat plate; I had to shave small amounts off the near-end corners to make it fit, as I couldn't line up screw holes otherwise. Minor problem and easily corrected.